So you have got your new shiny DJI Mini 2 drone and now you want to make sure it is well protected during your field trips and travels. A good DJI Mini 2 case can give you an extra piece of mind by securing all your Mini 2 accessories inside a hard, shockproof case.
In this article, I am going to explore the 5 best DJI Mini 2 cases that you can consider for your new drone. If you are in a hurry, the below table is a quick summary for you. Else, you can read the details for each of them in the below sections.
| Brand | Case Material | Approx. Size (in) | Shock & Waterproof | Price |
|---|---|---|---|---|
| Tomat | ABS hard plastic | 14 x 9 x 5 | Yes | Check on Amazon |
| VCUTECH | Polypropylene | 13 x 11 x 6 | Yes | Check on Amazon |
| SYMIK | Polyethylene | 13 ×12 × 5 | Yes | Check on Amazon |
| Lekufee | Polypropylene | 11 x 9 x 4 | Yes | Check on Amazon |
| Lykus | Polypropylene | 13 x 10 x 5 | Yes | Check on Amazon |
5 Best DJI Mini 2 Cases
Selecting a hard case for your DJI Mini 2 is very important, especially if you constantly travel and fly your drone in rough terrains. I remember dropping my remote controller from my backpack midway through a hike and had to go down a quarter mile to find it wrecked.
Having a drone case also helps you store all the accessories in the right compartment so that you don’t forget or misplace anything. Imagine going out for a flight session just to realize that you have forgotten your Mini 2 SD card in your drawer at home? Bummer right?
Let’s look at the top 5 hard cases made specifically for the DJI Mini 2. Remember that cases made specifically for your drone model (Mini 2 in our case) are better than the more generic multipurpose cases. The special cases provide better shockproofing.
Tomat Mavic Mini 2 Case
The Tomat Mavic Mini 2 case is a hardshell case made from strong and high-quality ABS plastic to endure the roughest use. ABS is a material choice for high finish plastic products normally used in laptops and other high-end electronic bodies. It is a strong and tough material that can withstand impact loads as well as pressure loads.
The outer shell closes like a normal briefcase with a double protection latch which provides an additional safety feature against unintended opening of the case.
The inner part of the case is filled with CNC cut high-density foam. There are separate compartments for all your Mavic Mini 2 gears and accessories, including the three batteries, parallel charger, remote controller, propellers, and the drone itself. Everything fits in nicely, and the padded foam provides an excellent shockproof containment.
The case is water and moisture proof so that you can easily carry it with you on rainy days. Although I would not recommend flying your Mini 2 during a rainy day as most drones are not waterproof, having a waterproof case still helps with handling and transportation.
The case is 14.1 x 9 x 4.7 inch and weighs 3.1 lb (1.4 kg). The price slightly varies from time to time but you can check the latest price on Amazon (link below)
VCUTECH Mini 2 Hard Carrying Case
This is another great Mini 2 case from Cynova. It is made of high-quality and durable Polypropylene (PP) plastic that can withstand extreme impact and pressure. It is a compact case the size of a normal briefcase that you can easily carry in your hand anywhere.
The internal section of the case is padded with EVA foam which provides enough cushion for your delicate electronics.
The EVA foam is laser cut to fit all the accessories and the drone itself snuggly so that they don’t wiggle around during bumpy rides. The EVA foam also serves as a shock absorber and protects the drone and accessories from damage.
The case is designed to be waterproof, shockproof, and dustproof (airtight) to give your drone maximum protection in all conditions and environments. The outer shell closes with two press snap latches for secure closure.
The best part is its 1-year long warranty and not just any warranty; if you don’t like the case, you can return it even after 12 months of use and get a full refund, no questions asked. I would say that’s a pretty solid deal – as solid as the case itself. Check it out on Amazon (link below)
SYMIK A310-MM2DL Hard Carrying Case for DJI Mini 2
The SYMIK hard case is a dual-layer case that accommodates more in very little space. Like the previous two cases, this one is also made from high-quality plastic called Polyethylene. PE is quite tough and can absorb high impacts and loads.
The inner part is made from high-density foam, which is laser cut to snug fit all the Mini 2 accessories and the drone. But what makes this case different from the rest is its modular approach towards storage space. With custom fittings, you can reshape the inner spaces as per your need to carry different things.
The SYMIK case is also the only case that can carry a DJI Smart Controller. So if you already have a smart controller, this case is probably your only choice as no other case comes with space for the smart controller.
You can even lift the upper storage layer and at the bottom of the case, you can store a SYMIK landing pad as well as an iPad Mini or Pro. None of the other cases have that much configurable space.
Lekufee Compact Portable Waterproof Hard Case
This one is probably my favorite of all because of its smallest size. When closed, it is only 10.8 x 8.8 x 4.3 inches smaller than the 4 cases we have discussed. This small size makes it very compact and portable.
It is made from tough Polypropylene molded plastic providing a durable and resilient cover for your expensive drone inside. The case is abrasion-resistant and provides an impact-proof shield for rough travel jolts.
The inside is padded with soft but snug-fit custom-designed foam that can hold your drone and all its accessories in separate compartments. The foam fitting also makes the case very impact-proof. You can drop it from body height the delicate drone inside will be perfectly safe.
It also comes with a 12-month warranty and if you don’t like it for any reason, you can send it back to claim a refund. Check out user reviews on Amazon (link below)
Lykus Titan MM200 Waterproof Hard Case for Mavic Mini 2
Last but not the least, we have the Lykus Titan MM200 – a specially designed hard case for the Mavic Mini. It is made from Polypropylene and has a footprint of 13 x 10 x 5 inches when closed. It can hold up to 6 batteries, a remote controller, parallel charging hub, props, and all the accessories in your fly more combo.
The internal EVA foam is precision cut to accommodate all the accessories in snug fit compartments to make them shockproof while traveling.
The entire case has a waterproofing rating of IP176, which is equivalent to modern smartphones, which is awesome. It will keep the drone and other items inside dry while you carry it in rather heavy rainfall.
You can check out the user reviews on Amazon and also check the latest price (link below)
Final Verdict & Editor’s Choice
All the 5 cases I discussed above are the best of the best in the market right now. Although I am flying MA2 and will be going for M3 soon, if I had my Mini 2, I would be going for Lekufee mainly because of its small and compact size.
Editor’s Choice : Lekufee Compact Portable Waterproof Hard Case
I hope this article will help you pick your perfect DJI Mini 2 case. In the comments, let me know which one you eventually picked and why. Safe flying!